Premium Tarps & Tarpaulin Manufacturer

+86 15601786499 (steven)

info@der-factory.com

中

Update time:2026/11/1 0:06:48 Views:0

For sheet converters, window fabricators & industrial distributors

Clear PVC Sheet Manufacturer for Transparent OEM Roll Supply

Source flexible transparent PVC sheet around the dimensions of your finished product. DER factory’s published ultra-transparent range gives buyers a practical starting point for thickness, width, color and hardness selection.

0.3–4 mmPublished ultra-transparent product thickness range*
Up to 2 mPublished maximum width; confirm usable width by grade*
Clear flexible PVC roll with a blue-tinted wound edge from DER factory
Flexible transparent PVC roll stock. The wound edge appears more strongly tinted than a single sheet. Approve appearance on a single layer at the ordered thickness.

*Published range is a product-family reference, not confirmation that every thickness, width and formulation combination is available. Final specifications require a written quotation.

The product, defined

What is transparent PVC sheet?

Transparent PVC sheet is a clear polyvinyl chloride material used where a product needs visibility and a protective surface. The flexible type supplied in rolls can bend, hang and roll into curtains, soft windows, covers and converted goods. Specify flexible roll stock separately from rigid PVC board: the same material name does not establish the same stiffness, fabrication method or end-use performance.

01 / CONSTRUCTION

A clear sheet has no woven load-bearing scrim

The viewing area is an unsupported PVC formulation rather than a textile coated on both sides. Formulation and processing affect flexibility, appearance and handling. A transparent sheet must be assessed with its supporting border, seams and fixings.

Compare the published super clear PVC product range when discussing the material family with DER factory.

02 / TERMINOLOGY

Order a measured gauge, not a name

“Film,” “sheet,” “clear vinyl” and “soft PVC” overlap in flexible-product catalogues. Put the thickness in millimeters or mils on the purchase order, together with its tolerance. One mil is 0.0254 mm; it is not one millimeter.

For a broader overview of thinner roll goods and conversion routes, see clear PVC film supply.

A quotation that can be compared

Clear PVC sheet manufacturer specifications to confirm

Use the published size range to begin the discussion, then agree the actual grade and acceptance limits. A nominal gauge alone does not define the sheet you will receive.

DER factory published range plus order-specific confirmation points
ParameterProduct referencePut in the approved specification
MaterialFlexible transparent polyvinyl chlorideFormulation / grade identity; identify any reinforcement, adhesive or liner separately.
Thickness0.3–4 mm published rangeOrdered gauge, tolerance, measurement locations and conditioning.
WidthMaximum 2 m published widthUsable width after edge allowance; availability at the selected thickness.
Color & hardnessCustomizable in the published rangeSingle-layer reference sample; hardness method and acceptance limits.
Roll length & massConfirm for the orderLength, core dimensions, maximum roll mass and permitted splices.
Surface & opticsApprove on an actual sheet sampleFinish, tint, visible-defect limits, blocking and any optical test requirement.
Strength & temperatureGrade-specific; no blanket rating statedRelevant tensile / tear criteria, service temperature and cold-handling conditions.
UV, FR & substance requirementsSubject to grade review and evidenceExact requirement, test method, thickness covered and required documents.
Conversion & packingAgree the supply scopeRolls or cut sheets, trial process, surface protection, labels and destination.

Thickness and maximum width are taken from DER factory’s published ultra-transparent product information. They do not imply a certified performance level, stock availability or a guaranteed thickness–width combination.

Ask for nominal width and usable width

A roll may meet its overall width while leaving too little clear, defect-free area for your panel layout. Agree which edge zones are excluded and where width will be measured before comparing quotations.

Match the sheet to the part

Choose by panel behavior and viewing quality

Thickness, softness and surface condition work together. Select a material that performs in the finished assembly, then translate that result into a repeatable order specification.

01 / SOFT WINDOWS

Tent & enclosure window panels

Check view distortion across a full panel, fold recovery, storage marks and the connection to the surrounding fabric. An attractive small swatch does not show how a large hanging window will look.

Trial the clear insert with the intended PVC tent fabric, including its overlap and corner layout.

02 / MOVING PANELS

Roll-up curtains & partitions

Balance drape against roll-up effort and total assembly weight. Trial the complete drop length, support spacing and operating cycle. Confirm that attachment areas transfer loads into the support structure.

Assess the grade at the lowest expected handling temperature, particularly if panels will be folded or rolled.

03 / SURFACE CONTACT

Table, equipment & protective covers

Prioritize lay-flat behavior, contact marking and removal after storage. Check the actual painted, printed or finished surface; prolonged contact can behave differently from a brief sample test.

For reinforced hems or attachment borders, evaluate PVC coated fabric as a separate construction component.

04 / EXPOSED USE

Outdoor transparent panels

Define sunlight, seasonal temperature, cleaning and storage before requesting a formulation. Water resistance, appearance retention and seam tightness are separate requirements.

The outdoor clear PVC sheet guide addresses weather exposure and finished-panel detailing.

Unrolled transparent PVC sheet showing its clear surface and curled edge
Single-layer appearance. Use a full-width sample to evaluate transparency, tint and visible surface marks.
Flexible clear PVC sheet roll and cardboard core viewed from the front
Roll presentation. Core, winding and packaging requirements affect how the sheet reaches your converting line.
Material use & handling

Compare usable yield before price per roll

A lower roll price can lose its advantage when the width does not fit your panel layout. Calculate cutting yield using the confirmed usable width and finished blank dimensions.

01 / CUTTING PLAN

Start with the blank, including its seam allowance

Calculate the blank width after adding hems, weld overlaps and trimming. Check the number of blanks that fit across the usable roll width, then calculate edge waste and length consumption.

Illustrative layout: two 0.95 m blanks need 1.90 m of usable width before any spacing between cuts. A 2.00 m usable width leaves 0.10 m across the roll; a 1.85 m usable width cannot accommodate that two-across layout.

This is a cutting example, not a recommendation for a particular sheet thickness or panel design.

02 / HANDLING MASS

Check whether the roll fits your handling limit

Estimate material mass using the selected grade’s density. Core, wrapping and pallet mass must be added separately.

Material mass (kg) = width (m) × length (m) × thickness (mm) × density (g/cm³)

Illustrative calculation only: 1.5 m × 20 m × 1.0 mm × an assumed 1.3 g/cm³ = 39 kg of sheet. The density is an example input, not a DER factory specification.

Confirm the grade density and actual roll mass before deciding how rolls will be lifted, loaded or stored.

Normalize the quotation

Ask for comparable quantity units, usable area, thickness tolerance, packing and delivered terms. If comparing a price per kilogram with a price per square meter, use the same agreed thickness and grade density; include expected conversion waste in your cost model.

From sample to purchase order

Approve sheet quality in four practical steps

Separate appearance approval from processing approval. Record the selected material and the agreed limits so a later delivery can be judged against the same reference.

01 / CONDITION & COMPARE

Judge a single layer at the ordered gauge

Unwind and condition the sample as agreed. Compare tint, clarity, waviness and surface defects against the same background, lighting and viewing distance. Record what is acceptable inside the viewing area and what may be trimmed away.

If a numeric optical criterion matters, identify the test method and the pass limit. A product photograph cannot establish transmission or haze.

02 / MEASURE

Check variation across the width and length

Agree a measurement plan for thickness and usable width. Include edge condition, roll length, splices and identification. A single center reading does not describe a full roll.

Define both the nominal value and its permitted variation. Keep records with the sample identifier instead of relying on an unlabelled swatch.

03 / CONVERT

Trial the complete joint and mating materials

For HF/RF or heat welding, use the intended production equipment, overlap and border material. Inspect cooled seams for distortion, weak zones and unwanted surface marks. For sewing, account for needle holes and reinforcement.

Check printing, adhesives and coatings separately where relevant. Compatibility must be established on the chosen grade, not inferred from the PVC name.

04 / RECORD & REORDER

Retain a sample and an acceptance sheet

Link the approved material to a grade reference, order number and inspection criteria. Ask which batch documents, retained samples and test records can accompany the supply.

Confirm any inspection frequency and documentation in writing. This is a buyer approval plan, not a claim that every listed test is automatically included with every shipment.

Need a sample for your converting line?

Send the actual blank size, ordered gauge, joining method and mating materials. Request enough representative material to assess both appearance and fabrication.

Alternatives & production decisions

When should you reconsider the material?

Choose around the function that controls the design. Flexible transparent PVC is one material route; a different stiffness, reinforcement or service requirement may need a different product.

RequirementSelection directionEvidence to request
Bending, hanging or rollingEvaluate flexible transparent PVC sheet.Full-size handling and joining trial at the intended temperature.
Self-supporting clear boardEvaluate a rigid-sheet product separately.Rigidity, dimensions, fabrication guidance and application-specific performance.
Concentrated fixing loadsReview reinforced borders or a textile-backed design.Assembly design and representative attachment testing.
Different elasticity or cold-flex behaviorConsider another film chemistry and compare actual grades.Like-for-like processing and service-condition trials.
Required FR or restricted-substance complianceSelect a documented formulation for that requirement.Applicable test scope, grade identification and thickness coverage.

If your project requires a different film chemistry, review the TPU film product route with a like-for-like specification. Do not assume that one polymer family wins every flexibility, durability or cost comparison.

What changes the purchase cost?

Thickness, formulation, optical acceptance limits, width, roll length and order quantity all change the quotation. Special packing, testing and conversion may add separate costs. Confirm which operations and documents are included before comparing suppliers.

Protect the surface after delivery

Inspect packaging and roll labels on arrival. Follow the agreed storage method, keep sharp objects away from the clear surface and check for contact marks during a controlled unwind. Trial the proposed cleaner on an offcut before using it on a finished viewing panel.

Common buying questions

Clear PVC sheet: questions before ordering

What is the difference between clear PVC sheet and clear PVC film?

The names overlap in flexible roll goods, and there is no single naming threshold used by every supplier. Order by construction, measured thickness, hardness and usable width. This page focuses on flexible transparent sheet rolls; the published DER factory ultra-transparent range is 0.3–4 mm, subject to grade confirmation.

Does DER factory supply rigid transparent PVC board?

The product covered here is flexible transparent PVC sheeting. If you need a self-supporting rigid board, specify that requirement before requesting a quotation. Flexible sheet is selected for bending, hanging and rolling; it should not be treated as rigid glazing or a rated impact guard.

Which clear PVC sheet thickness should I choose?

Choose thickness together with panel size, support, handling and fabrication. A thicker sheet adds material and handling weight but does not establish a load rating. Compare samples at the intended gauge, then trial the full-size part and its attachments before approval.

Can transparent PVC sheet be used outdoors?

Only select a grade after reviewing sunlight, temperature, exposure duration and the intended construction. Waterproof sheet does not automatically provide proven UV durability or a watertight finished assembly. Confirm an outdoor formulation and the required performance evidence for the specific order.

Can clear PVC sheet be welded or sewn?

Many flexible PVC grades can be joined using suitable high-frequency or heat-welding processes. Confirm compatibility with the exact grade, mating material and equipment. Sewing introduces needle holes and may need a reinforced border. Approve a representative finished joint before bulk conversion.

How do I specify clarity and hardness?

Use an approved sample at the ordered thickness and agree lighting, background and viewing distance. Specify any optical test and its acceptance limit. For hardness, agree the measurement method and conditions; a formulation ratio and a measured hardness value are different specifications.

Are fire retardancy and substance compliance included?

They must be confirmed for the selected formulation and thickness. Identify the destination market, intended use and exact requirement in the RFQ. Request applicable grade-specific documentation; appearance, the PVC material name or a general company document does not establish product compliance.

What are the MOQ, sample terms and production lead time?

These depend on the selected formulation, thickness, width, quantity, packaging and testing. Ask DER factory to confirm sample availability, minimum order, production schedule and shipping terms in the written quotation. No universal MOQ or delivery time is stated for all clear sheet orders.

Turn the panel drawing into a material brief

Request transparent PVC sheet matched to your production

Tell DER factory what you are making and how you will cut, join, handle and use the sheet. Include the limits that matter to your production line so the quotation can address the actual requirement.

DER factory
Anhui DER New Material Technology Co., Ltd
info@der-factory.com
+86 15601786499

Minimum order, samples, testing scope and lead time are confirmed with your selected specification.

Include these details in your RFQ

  • Finished product, destination and service environment.
  • Flexible sheet requirement and any reference sample.
  • Thickness and tolerance; usable width and roll length.
  • Blank sizes, cutting layout and quantity by specification.
  • Single-layer clarity, tint, hardness and surface expectations.
  • Joining method, mating materials and any printing.
  • Required UV, FR or substance-compliance evidence.
  • Core size, roll mass limit, packing and shipment terms.

Supply scope: state whether you need roll stock, cut sheets or a finished assembly; request written feasibility confirmation for additional fabrication.

DER factory · Flexible transparent PVC sheet procurement guide · Updated 31 October 2026 · Back to top

Contact Us (You are welcome to consult at any time!)

Zhangbaling Plastic Polymer Industrial Park, Zhangbaling Town, Mingguang City, Chuzhou, Anhui Provin

info@der-factory.com

+86 15601786499 (steven)

Product recommendation

#
truck tarps
  • 2026-10-26
#
#
#
vinyl tarps
  • 2026-09-13
#
Waterproof Tarps
  • 2026-08-27
#
#
#
#
Vinyl Coated Tarps
  • 2026-05-24
#

Application Fields Of Our Products

Our products are widely used in our residential and industrial area, which can be used for producing tents, outdoor covering, flexible ventilation tube, water bladders, inflatable castles, architecture membrane structures, etc. Our main products: PVC coated fabrics, PU/TPU coated fabrics, Oxford fabric, PVC ceiling film, flexible banner material. Welcome to our site and order online.