A reinforced, waterproof and fabrication-friendly sheet material for industrial curtains, equipment covers, tarpaulins, truck and trailer systems, tents, temporary enclosures and custom textile products.
Flexible PVC coated polyester sheeting is not a simple unsupported vinyl film. It is a composite technical textile: a woven polyester reinforcement carries mechanical load, while the PVC coating creates a continuous protective surface. That combination lets the material remain flexible enough for rolling, folding, welding and sewing while delivering much higher tear control and dimensional stability than unreinforced plastic film.
High-tenacity polyester yarns form the internal load-bearing structure. Yarn denier, weave density and fabric construction influence tensile strength, tear propagation and dimensional behavior during installation or repeated handling.
The coating creates the waterproof surface and can be engineered for flexibility, color, UV exposure, abrasion, anti-mildew performance, flame-retardant requirements or easier cleaning.
For converters and OEM manufacturers, consistent thickness, coating adhesion, color and weld behavior often matter more than a single headline strength figure because they directly affect fabrication efficiency and repeat-order quality.
A 650 GSM industrial curtain, a 650 GSM truck cover and a 650 GSM tent panel can require different base fabrics, coating recipes and surface finishes. Tell us what you are making, how it will be fabricated, where it will be used and how long it is expected to last. That produces a more useful recommendation than choosing by weight alone.
The most common construction uses a high-tenacity polyester woven base coated on both sides with PVC. Depending on the target market, the surface may then receive a lacquer, acrylic treatment, embossing or other functional finish.
For outdoor covers and high-cycle flexible products, the balance between coating softness and adhesion is critical. A coating that is too hard may crack during repeated folding; a coating that is too soft may show excessive blocking, abrasion or surface marking. DER factory can adjust the formulation around end-use requirements.
Construction can be adjusted by yarn specification, weave density, coating thickness, plasticizer system, pigment, additives and surface treatment.
Searches for flexible PVC sheeting usually come from buyers trying to solve a practical manufacturing problem: a material must survive handling, weather, welding, tension, abrasion and repeated use without making the finished product unnecessarily heavy or expensive.
Formulated to remain foldable and workable for curtains, roll-up systems, removable covers and other products that move instead of staying rigid.
A continuous PVC-coated surface supports waterproof cover construction when panels and seams are fabricated correctly.
The woven polyester reinforcement slows tear propagation and provides a stronger foundation for tensioned or repeatedly handled products.
Suitable grades can be converted by hot-air and high-frequency welding for panel joining, pockets, hems, reinforcement strips and shaped covers.
UV-stabilized formulations are available when long outdoor exposure is expected in truck, tent, construction or storage applications.
PVC surface design helps protect the base fabric from repeated rubbing, handling, dirt and normal industrial wear.
Cold-resistant formulations can be specified for regions where standard PVC may become too stiff in winter conditions.
Flame-retardant directions can be developed for selected industrial, public-space, curtain and shelter projects when a defined test standard is required.
The table below is a sourcing guide rather than a promise that every construction shares the same values. Final mechanical properties depend on yarn, density, coating weight and product grade. Ask for the datasheet of the exact item quoted.
| Parameter | Typical Direction | Procurement Notes |
|---|---|---|
| Base Fabric | High-tenacity polyester | Yarn denier and weave density selected around strength, flexibility and cost targets. |
| Coating | PVC, one or two sides depending on construction | Double-sided coated structures are common for industrial sheeting and tarpaulin applications. |
| Weight | 200–1200 GSM | Light, medium and heavy-duty constructions available according to application. |
| Width | Approx. 1.0–3.2 m common range | Specific lines and products may support other width directions; confirm with quotation. |
| Roll Length | 20 m / 30 m / 50 m / custom | Chosen around shipment, cutting table and production efficiency. |
| Surface | Glossy / matte / embossed / lacquered | Surface choice influences appearance, cleanability, friction and branding. |
| Color | White, blue, grey, black, red, green, yellow, custom | Custom color matching is subject to quantity and color tolerance. |
| Temperature | Typical standard direction about -20°C to +70°C | Cold-resistant formulations can be discussed for lower-temperature service. |
| Fabrication | Hot-air welding, HF/RF welding, sewing, cutting | Provide your process and equipment type before mass production. |
| Functional Treatments | UV, FR, anti-mildew, anti-static and other project options | Always specify the required test method, market or end-user requirement. |
Need a 450 GSM lightweight cover fabric, a 650–900 GSM industrial grade, or a heavier technical structure? Send the end use and target performance rather than only the thickness.
The images below are hosted on the DER factory website and show PVC tarpaulin / coated-fabric material and finished-cover details relevant to flexible coated polyester sheeting.
DER factory supplies roll material for professional converters and can also support custom-made tarpaulin and cover projects. The most useful customization starts with the fabrication process and finished-product geometry.
GSM, thickness, width, roll length, color, surface finish and packaging can be matched to OEM production requirements.
Heat-welded panels, reinforced hems, eyelets, webbing, pockets and custom dimensions can be discussed through DER factory's custom tarp solutions.
For projects requiring special safety or environmental performance, review the exact standard, such as a specific FR test, REACH/RoHS request or low-temperature requirement, before production.
The same broad material family is used across many markets, but each market values different properties. Choosing by use case improves product life and reduces over-specification.
Flexible wall systems, factory dividers, dust barriers, warehouse zoning and equipment screens. Focus on flex life, cleanability, FR requirements and hanging reinforcement.
Side curtains, truck tarps and transport covers require strong tear control, stable welding, weathering and abrasion resistance. Explore DER's truck cover tarpaulin solutions.
Protect generators, machinery, construction equipment and stored assets from rain, dust and UV. Material can be selected around repeated removal, straps and reinforced contact points.
Event tents, industrial shelters and temporary structures typically place more emphasis on weatherability, clean appearance, weld strength and flame-retardant direction. See PVC tent fabric.
Temporary roofing, scaffold protection, weather barriers and site covers need strong fastening performance and reliable outdoor durability. Related: construction tarps.
Pallet covers, warehouse covers, protective sleeves, flexible doors, agricultural covers and special OEM products can all be developed from the same coated-textile platform.
For coated polyester sheeting, quality should be evaluated as a system. A roll that looks acceptable can still cause problems if coating adhesion, width, color, tensile behavior or weld response varies from batch to batch. DER factory's own product documentation highlights strict production inspection, ISO-oriented management and the availability of third-party testing for project requirements.
A strong quotation request gives the factory enough information to recommend a suitable structure, avoid unnecessary cost and reduce sample revisions.
Truck tarp, industrial curtain, machinery cover, tent wall, flexible door, construction sheet or another finished item.
Indoor/outdoor, UV exposure, wind, humidity, chemicals, temperature and cleaning method.
Hot-air weld, HF/RF weld, sewing, adhesives, eyelets, webbing, keder, pockets or special edge structures.
Tear resistance, tensile strength, abrasion, flexibility, low-temperature handling or repeated roll-up cycles.
Color, matte/gloss surface, embossing, lacquer, printing or brand color matching.
Required width, roll length, order quantity, annual forecast, packaging, destination port and requested documentation.
Send: application + target GSM/thickness + width + roll length + color + surface + fabrication method + required test standard + quantity + destination. If you only have a competitor sample, send the sample details and the performance problem you want to improve.
These internal pages help buyers compare the same material platform in different finished-product and performance contexts.
Base material overview, technical properties and common industrial uses.
Heavy-duty coated polyester material used in transport and cargo protection.
Custom dimensions, reinforced edges, welding, eyelets, print and OEM conversion.
Weatherproof building covers, scaffold protection and temporary enclosure use.
PVC-coated polyester for event tents, shelters, marquees and temporary structures.
FR material directions for projects requiring defined flame-performance standards.
It is a reinforced flexible composite made by coating woven polyester fabric with PVC. The polyester scrim provides tensile strength, tear control and dimensional support, while the PVC coating provides waterproofing, abrasion resistance, color, cleanability and a surface that can be welded or sewn into finished products.
There is no single best GSM. Lightweight grades are easier to fold and handle; medium-weight constructions are common for general industrial curtains and covers; heavier materials are preferred for demanding transport, construction, structural shelter or long-term outdoor use. The right structure depends on the finished product and loading conditions.
The coated fabric itself can provide a continuous waterproof barrier. The finished cover is only as waterproof as its seams, penetrations, attachment points and installation. Heat-welded seams are commonly used where stronger water sealing is required.
Yes. UV-stabilized and flame-retardant formulations are available for suitable projects. Because markets use different test standards, send the exact requirement—such as NFPA, B1, M-series or another specification—so the correct grade and documentation can be confirmed.
Yes. Custom GSM, thickness, width, color, roll length, gloss level, matte surface, embossing, lacquer and selected functional treatments can be discussed according to production feasibility and order quantity.
Yes. DER factory supports professional converters, distributors and OEM manufacturers. Tell us whether you use hot-air welding, high-frequency/RF welding, sewing or a mixed process, plus the required seam design and production speed, so the material can be matched more appropriately.
Need a waterproof, flexible and weldable coated textile for industrial conversion? DER factory can recommend the structure around your finished product instead of forcing one generic fabric into every application.
Our products are widely used in our residential and industrial area, which can be used for producing tents, outdoor covering, flexible ventilation tube, water bladders, inflatable castles, architecture membrane structures, etc. Our main products: PVC coated fabrics, PU/TPU coated fabrics, Oxford fabric, PVC ceiling film, flexible banner material. Welcome to our site and order online.