Source thermoplastic polyolefin membrane for commercial flat roofs, industrial low-slope buildings, reroofing programs and private-label distribution. Der Factory supports project-specific selection of reinforced, homogeneous and fabric-backed constructions.
A TPO roof uses a thermoplastic polyolefin sheet as the exposed waterproofing layer of a flat or low-slope roofing assembly. Compatible sheets are positioned over the approved build-up and joined with controlled hot-air welds.
Procurement teams should match the membrane construction to the attachment method, rooftop traffic, puncture risk, climate and maintenance strategy. Review the waterproof TPO roofing membrane product resource for related material options.
Connect the sheet specification to the roof-system risks that must be controlled during purchasing and installation.
Confirm weld compatibility, overlap design, test-weld procedures and seam inspection.
Coordinate roof zones, fastener density, plates, substrate and perimeter securement.
Match thickness, reinforcement, cover board and walkway protection to service access.
Agree on relevant weathering, dimensional-stability and heat-aging requirements.
Freeze construction, dimensions, tolerances, color, packing and inspection criteria.
Confirm field membrane, backed sheet, flashing material and accessories as a package.
The best TPO sheet depends on whether it is used across the roof field, at formed details or in an adhered/recover assembly.
A common starting point for broad roof-field coverage requiring tensile and tear strength.
More formable non-reinforced material for selected flashing and detail uses.
A backing layer may support selected adhered or recover concepts after compatibility verification.
For fabricated non-roofing uses, review the TPO tarpaulin and industrial fabric page.
The table is a quotation framework. Final tolerances, test methods and acceptance criteria belong in the approved specification.
| Selection Item | Typical Discussion Range | Why It Matters | RFQ Confirmation |
|---|---|---|---|
| Construction | Reinforced, homogeneous, fabric-backed | Changes strength, formability and attachment compatibility | Roof field, flashing, recover or other application |
| Thickness | 1.2, 1.5 or 2.0 mm options | Influences mass, handling and puncture margin | Nominal value, tolerance and measurement method |
| Width | 1.0 m or 2.0 m typical | Affects seam count, roll weight and labor | Usable width and handling limit |
| Length | 20 m typical; alternatives by confirmation | Impacts staging, seam layout and pallet loading | Length tolerance, core and gross roll weight |
| Color | White, gray or custom subject to MOQ | Influences reflectivity and project appearance | Reference sample and color tolerance |
| Testing | Customer-defined or mutually agreed plan | Provides objective batch release criteria | Standard, edition, frequency and report format |
| OEM packing | Core, wrap, labels, cartons and pallets | Protects rolls and supports stock control | Artwork, barcode, batch ID and pallet limits |
Membrane selection must be evaluated as part of the full assembly and project design.
Membrane and underlying components are secured using approved fasteners and plates.
The sheet is bonded to an approved substrate or cover board with a compatible adhesive.
Special plates secure the assembly and induction equipment bonds the membrane to each plate.
The visuals below use the confirmed TPO roofing and installation images supplied from Der Factory’s /en/up/pic/ directory.
Designed for professional buyers who need repeatable rolls, documented specifications and practical export supply.
Large low-slope roof fields where roll productivity and seam planning matter.
Projects requiring puncture planning, walkways and controlled perimeter zones.
Reflective roofs and extensive rooftop equipment need coordinated detailing.
Specification-driven procurement with documentation and batch consistency.
Existing roof condition, moisture and compatible attachment must be assessed.
Private-label supply with stable dimensions, codes, labels and pallet plans.
Predictable welding behavior, manageable roll weight and clear identification.
Repeat geometry and factory production scheduling can support efficient supply.
A written test matrix gives both supplier and buyer objective release criteria for the approved product.
Answers for contractors, importers, distributors, private-label brands and procurement teams.
A TPO roof membrane is a thermoplastic polyolefin single-ply waterproofing sheet used mainly on flat and low-slope roofs.
Select thickness together with the roof assembly, attachment method, expected traffic, puncture risk and project specification. Common sourcing options include 1.2 mm, 1.5 mm and 2.0 mm, subject to confirmation.
Yes. Compatible TPO sheets are joined with controlled hot-air welding. Temperature, speed, pressure and overlap must be established for the supplied membrane and site conditions.
Der Factory can discuss polyester-mesh reinforced, homogeneous and fabric-backed TPO constructions. Availability, MOQ and test requirements are confirmed in the quotation.
OEM discussions can include construction, thickness, width, length, color, backing, roll marking, labels, cartons and palletization.
Provide membrane type, thickness, width, length, color, attachment method, requested test standard, order quantity, destination and delivery date.
Six related internal links support product selection, applications and material comparison.
Include construction, thickness, roll size, color, attachment concept, test requirements, order quantity, packing and destination.
Our products are widely used in our residential and industrial area, which can be used for producing tents, outdoor covering, flexible ventilation tube, water bladders, inflatable castles, architecture membrane structures, etc. Our main products: PVC coated fabrics, PU/TPU coated fabrics, Oxford fabric, PVC ceiling film, flexible banner material. Welcome to our site and order online.
