Wholesale roll distribution
Define a small, practical grade matrix with separate item codes for GSM, color, usable width and finish. Ask whether different grades or colorways have separate minimums and production schedules.
Source PVC-coated polyester textiles by the specification your production actually uses—not just by color or GSM. DER factory works with importers, distributors, tarp converters and OEM buyers on roll materials, custom configurations and specification-led supply.

A PVC coated fabric supplier provides reinforced textile roll goods with a polyvinyl chloride (PVC) surface layer, plus agreed cutting or finishing services where required. In most industrial tarp applications, woven polyester carries tensile loads while the PVC layer delivers the protective, weldable surface. Wholesale PVC fabric is typically sourced by construction, fabric weight, usable roll width, finish, required performance and order quantity—not by the material name alone.
For fabric distributors, this means consistent catalog grades and packing; for converters, workable width and reliable seams; for project buyers, documented specifications and acceptance tests. See the wider PVC coated fabric product range for related material families, including grades beyond a standard tarp roll.
Define a small, practical grade matrix with separate item codes for GSM, color, usable width and finish. Ask whether different grades or colorways have separate minimums and production schedules.
Match coating structure and weld behavior to cutting, hot-air welding, high-frequency welding or sewing. Check usable width, edge trim and roll handling before production.
Approve a reference sample, control revision changes and define roll labels, packing, inspection criteria and reordering rules before scaling an assortment.
The table is an RFQ framework, not a fixed DER factory product data sheet. Final tolerances, available constructions and test results must be confirmed for the selected grade.
| Purchase parameter | Options / information to request | Why it changes your order |
|---|---|---|
| Reinforcement | Polyester yarn denier, warp/weft density, fabric construction | Affects tensile, tear, dimensional stability and conversion behavior. |
| Coating route | Knife-coated or laminated PVC; one-/two-sided design as required | Affects coating coverage, bonding, surface uniformity, cost and end use. |
| Nominal weight (GSM) | Specify target g/m² with accepted tolerance | Impacts roll mass and handling; does not by itself prove strength. |
| Thickness & surface | Target thickness, embossed/smooth, matte/gloss, selected topcoat | Influences weld settings, abrasion, cleaning and appearance. |
| Usable roll width | Required usable width after edge trim; roll length; core dimensions | Determines conversion yield and freight/warehouse handling. |
| Color program | Reference sample or color target; separate colorway quantities | Color changes can alter minimums, planning and repeatability. |
| Outdoor exposure | UV/weathering, cold-flex and abrasion requirements | Application and local climate determine which tests matter. |
| FR or special finish | Required test standard, test method, sample and project use | Request evidence for the specific grade; no blanket FR claim. |
| Seam compatibility | Hot-air/HF weld trial, seam test, topcoat treatment | Some finishes affect welding; test real samples with your process. |
| Shipping unit | Roll ID, packing method, labeling, palletization, quantity unit | Supports stock control, claims and cross-border receipt checks. |
Procurement distinction: a published nominal GSM cannot substitute for tensile, tear or coating-adhesion data. Request direction-specific test values and a test method when load or seam failure would matter. For deeper factory construction and coating information, see the PVC coated fabric manufacturing overview.
Knife-coated constructions apply PVC coating to the textile and may suit applications requiring tailored mechanical and surface properties. Laminated constructions bond film layers to the reinforcement and can be an economical route for suitable uses. Neither process automatically guarantees a particular service life or weld strength.
For every offered construction, compare coating adhesion, useful width, surface finish, flexibility, seam strength and the tests relevant to the intended product. Heavy cover fabric purchasers can also review heavy-duty PVC fabric roll options.

Quote comparison starts with a common unit and an identical specification. A lower price per linear meter may be a higher price per square meter if the usable roll width differs. Likewise, two fabrics with equal GSM can have different reinforcements, coating constructions and performance.
A wholesale quotation can then be evaluated on usable output and total landed cost, not price alone. For mixed-SKU tarp assortment planning, see the tarpaulin wholesale buying overview.
Example only — not a DER factory stock specification or quotation.
Usable width × roll length = usable area.
1.50 m × 50 m = 75 m².
At a hypothetical 650 g/m², fabric mass ≈ 75 × 0.650 = 48.75 kg (excluding core, wrap and pallet). Actual yield must allow for trim, defects and cutting layout.
GSM is mass per area, not millimeters of thickness. PVC coating density, substrate construction and finishes prevent any universal GSM-to-mil conversion. Use the GSM / oz / mil measurement guide when preparing your purchase sheet.
Start with the finished product and how it fails in service. Ask for a construction review when you have an unusual loading, temperature, cleaning or compliance condition.
| Buyer application | Suggested specification focus | Discuss with supplier before ordering |
|---|---|---|
| Truck and cargo covers | Reinforcement, tear, edge and weld strength, weathering | Wind loading, tie-down positions, repeated folding and abrasion zones. |
| Industrial curtains & partitions | Flatness, cleanability, flexibility, weldability | Opening cycles, track and fastening hardware, temperature and fire requirements. |
| Tents and temporary enclosures | Weld seams, UV exposure, tear strength, appropriate FR grade | Relevant local fire-code acceptance criteria and sample/test documents. |
| Equipment covers and OEM tarps | Usable width, color, abrasion, reinforcement and finish | Finished pattern, hardware, hem allowance, labels and packing format. |



Buying finished covers rather than rolls? Measurements, cut patterns, hems, webbing and eyelets should be specified on a separate fabrication drawing. Read the custom tarps fabrication options before requesting an OEM price.
Send Your ApplicationBulk purchasing becomes easier when each repeat order refers back to an approved physical sample and written requirements. The following checks are a recommended buyer–supplier agreement workflow, not a claim that every test is automatically included.
Retain a labeled swatch with color, finish and chosen material construction. A photograph alone is not a color-control standard.
Record width, GSM, yarn, coating route, acceptance tolerances, test method and any critical finish.
Where warranted, test weldability, cutting and attachment behavior with your own production equipment.
Select meaningful visual, width, mass, tensile, tear, adhesion or FR tests for the intended grade before order confirmation.
Ask for batch/roll ID, color, nominal dimensions and agreed packing/handling information on labels.
Require explicit approval for changes in substrate, coating, finish, color standard or agreed construction.
Technical limit to plan for: flame-retardant classification, weathering performance and chemical resistance depend on the exact formulation and tested configuration. Request evidence for the relevant grade and project standard rather than relying on a generic “FR” or “UV-proof” claim.
A purchase inquiry is actionable when a supplier can identify the product, production quantity, quality criteria and delivery point. For a new grade, attach a sample photo or an existing technical sheet as a reference, then confirm it with physical evaluation.
Ask for a quote separated by construction and color. This avoids a misleading single blended MOQ or one quoted lead time across several very different specifications.
Direct answers to sourcing questions about coated textile rolls, fabric requirements, OEM programs and orders.
A PVC coated fabric supplier provides reinforced PVC-coated textile rolls and, where agreed, cut or fabricated materials. Wholesale buyers should confirm the coating method, base fabric, usable width, roll length, color, strength and packaging for each grade.
Multiple colors and constructions can be discussed for a wholesale program. Feasibility depends on the grade, coating setup, individual color volume and production scheduling. Request a line-by-line quote rather than assuming a mixed order shares one minimum quantity.
There is no universal GSM for truck covers or industrial curtains. Specify mechanical loads, frequency of flexing, abrasion, wind exposure, reinforcement, coating construction and required test values; then select a fabric grade. GSM alone is not a strength rating.
An intact continuous PVC coating can provide a waterproof barrier, and many PVC coated polyester fabrics can be hot-air or high-frequency welded. Finished waterproofing depends on seam design, edges and penetrations. Confirm the exact grade and approve weld samples before bulk fabrication.
The minimum order quantity varies by construction, color, finish, roll width and whether the order uses an existing or custom specification. DER factory confirms the applicable MOQ for the requested grade at quotation; no fixed MOQ is promised on this page.
Approve a reference sample and a revision-controlled specification that records base fabric, coating, color, usable width, finish and tests. Ask for agreed production tolerance, batch identification and pre-shipment checks on each order. Physical samples should be retained for comparison.
DER factory can review OEM requirements for material selection, custom color, rolls, labels, packing and fabricated covers. Feasibility, minimums, print or welding trials and final construction must be confirmed against the project brief.
Price and lead time depend on polyester reinforcement, PVC compound and coating weight, width, finish, color changes, order volume, optional testing and packaging. Compare offers in the same area or length unit, with defined usable width and delivery terms. A supplier quote confirms actual price and schedule.
Tell DER factory what you manufacture, the construction you need, order quantity by color and the performance or processing requirements that matter. We can review material options, samples and the appropriate quotation scope for your project.
Our products are widely used in our residential and industrial area, which can be used for producing tents, outdoor covering, flexible ventilation tube, water bladders, inflatable castles, architecture membrane structures, etc. Our main products: PVC coated fabrics, PU/TPU coated fabrics, Oxford fabric, PVC ceiling film, flexible banner material. Welcome to our site and order online.