Rapid side loading
Sliding side panels allow forklifts to approach palletized freight from the vehicle side, unlike a fixed rigid wall.
Curtainsider materials · Trailer builders · OEM fabricators
Specify PVC-coated polyester curtain material for truck side curtains, curtainsider trailers, replacement panels and printed fleet covers. DER factory supports project-based choices in fabric weight, roll format, color, coating finish and fabrication requirements.

Direct product answer
A PVC truck curtain is a flexible sidewall panel used on curtain-sided trucks and trailers. Most designs start with high-tenacity woven polyester coated on both sides with polyvinyl chloride (PVC), then add top attachments, reinforced hems, straps and closures appropriate to the trailer. The curtain slides or gathers to provide side access for loading, while its PVC surface shields goods from rain, road spray and dirt. For importers, trailer builders and repair shops, DER factory provides a sourcing point for coated material rolls and project-specific curtain fabrication discussions. Curtain fabric is not automatically a certified cargo-restraint system.
Sliding side panels allow forklifts to approach palletized freight from the vehicle side, unlike a fixed rigid wall.
PVC-coated polyester protects the load area, while seam layout and fitting control the actual water-entry points.
Top track, pole contact, strap loads and lower buckle zones require more attention than the center of the sheet.
Material engineering
A truck curtain is a moving tensioned panel, not a static warehouse cover. High-tenacity polyester yarn contributes tensile and tear performance; PVC coating provides a weldable protective surface. Lacquer and additives can be considered for outdoor exposure, dirt release, printing or cold flex, subject to sample approval.
For a detailed explanation of coating and base cloth selection, compare DER factory’s PVC-coated fabric products. If you need a separate flatbed or dump-body cover rather than a curtainsider sidewall, review the truck tarp solutions.
Conceptual layer guide — not a test section or a fixed DER factory SKU.
Specify test methods and minimum results for each construction instead of assuming a weight number proves performance.
Where service problems start
Trailer movement concentrates damage at specific zones. Use these requirements to explain failure risks to a fabric supplier before production.
Check length and width direction results in a stated test method. Large curtain runs and buckle tension can load the fabric differently.
Ask for tear data and a reinforcement detail around buckles, vertical posts, top rollers and strap termination points.
Evaluate PVC-to-scrim adhesion and representative welded seam peel on the actual material, not an unrelated generic tarp.
Define coldest operating temperature and expected opening cycles. A heavy panel that stiffens can be difficult to move.
Outdoor surface options should match climate, cleaning chemicals, color retention needs and graphics maintenance.
Waterproof sheet material cannot fix poor front/rear overlap, missing flap protection or damaged closure hardware.
Application-to-specification mapping
For truck curtain material, the usual commercial discussion spans approximately 650–900 grams per square meter (GSM). These are general industry starting points, not verified DER factory stock SKUs or a guarantee that one grade is stronger.
| Project condition | Starting direction | What to verify on the sample |
|---|---|---|
| Routine regional fleet, frequent opening | About 650–750 GSM; prioritize manageable curtain weight and good flexibility | Top hem geometry, buckle-zone tear, cold flex and roll width |
| Mixed-route logistics with logo graphics | About 750–850 GSM; specify a suitable print lacquer and weathering level | Ink adhesion after cleaning, fold-line cracking, color matching and seam appearance |
| Large curtain panel, repeated abrasion or long-haul | About 850–900 GSM; compare the reinforced base construction, not weight alone | Tear and tensile data, welding, roller drag and completed panel mass |
| Cold climate or project-specific fire criteria | Choose formulation and testing first; GSM is secondary | Low-temperature flex, requested fire standard, evidence for the final construction |
GSM measures mass per square meter. It is not a direct substitute for millimeter thickness, tensile strength or lifetime. Read the GSM, oz and mil measurement guide before comparing supplier quotations.
Illustrative panel: 13.6 m × 2.65 m = 36.04 m², before hems and waste. Fabric-only mass at 650 GSM ≈ 23.43 kg; at 900 GSM ≈ 32.44 kg. The heavier fabric adds about 9.01 kg per side, before rollers, webbing, buckles, print and seam layers. This is a sizing example, not an actual truck curtain model or DER factory performance claim.
Buyer data sheet
Use this table when comparing PVC truck curtain suppliers. Values marked “project-dependent” must be confirmed on the technical data sheet or approved sample before an order.
| Parameter | Selection / quotation field | Purchasing implication |
|---|---|---|
| Product / use | PVC truck curtain fabric for curtainsider and trailer side curtains | Different from a flat cargo cover or a complete track assembly |
| Base fabric | High-tenacity woven polyester; yarn count and weave to be specified | Request warp/weft tensile and tear results |
| Coating | Double-sided PVC coated polyester; laminated variants evaluated separately | Check coating adhesion, weldability and surface consistency |
| Weight / GSM | Approx. 650–900 GSM common market reference; final grade quoted after review | Compare loading and handling mass with the minimum required strength |
| Thickness | Measured mm value: to be confirmed with actual construction | Do not infer thickness by converting GSM directly |
| Roll width & length | Project-dependent; request usable coated width and roll tolerances | Controls seam placement and conversion waste |
| Colors & finish | Standard or custom color, gloss / matte, optional lacquer or printing surface | Confirm Pantone/RAL reference against physical samples |
| Strength requirements | Tensile, tear and coating adhesion — minimum test values by agreement | Use stated ISO/EN/ASTM methods, directions and tolerances |
| Operating environment | Expected sun, temperature, cleaning, road contamination and bending cycles | Select UV / cold-flex / finish requirements before production |
| Fire behavior | Optional testing against a named standard, if needed | Only claim compliance after checking current evidence |
| Fabrication | Roll goods, cut panels or project-based welded curtain design | Specify seams, straps, hems, buckles and top attachment drawing |
| Packaging & order | Roll ID, labeling, quantity, shipment method and destination | Confirm packing method, MOQ and lead time in the quotation |
No listed range should be read as guaranteed current inventory, certified compliance or fixed factory output. For wider truck-cover material selection, see truck tarpaulin materials.
OEM and fabrication
The right supply format depends on whether you manufacture trailers, convert coated fabric or replace curtains in an existing fleet.
For converters who already cut, weld and assemble curtain-side panels. Prioritize consistent usable width, repeatable color, roll edges and seam qualification.
RFQ: GSM, scrim, width, color, finish, print direction, rolls and destination.For workshops that need defined cuts or welded sections. Review panel flatness, lap placement, orientation and the allowance for later assembly.
RFQ: finished size drawing, panel orientation, seam plan and tolerance.Where full fabrication is requested, confirm feasible hardware integration, straps, pockets, top attachment and final fit before quotation. No generic ready-made size is assumed.
RFQ: trailer model, photos, track, strap positions, closures and logo artwork.
For mixed production orders, provide one approved master drawing per truck model and photograph key hardware. For custom accessories and manufacturing formats, explore custom tarpaulin fabrication and reinforced attachment design.
Real product and material images
Original DER factory product photographs show the base coated material, available roll colors and related truck-tarpaulin uses. The transport photo illustrates a flatbed cover; it is not presented as an installed curtainsider or a finished-curtain certification example.




Buying trade-offs
Two products may both protect a truck from rain while requiring very different construction. Matching the system is more important than matching the word “tarp.”
| Option | Best-suited requirement | Trade-off / verification |
|---|---|---|
| PVC-coated polyester side curtain | Movable curtainsider panel with rail, buckle, printed branding and welded reinforcements | More attention to fold behavior, seam layout, top attachment and strap wear |
| PE tarpaulin truck cover | Temporary or cost-sensitive flat covers where lower weight may be valuable | Check expected cycles, puncture resistance, repair method and fasteners; not an interchangeable curtainsider system |
| Heavy-duty flatbed PVC tarp | Steel, lumber and exposed cargo tied down from multiple sides | Cut pattern, reinforcement and tie-down geometry differ from a side-track curtain |
| PVC laminated polyester | Some cover and panel applications where its construction meets technical requirements | Do not assume lamination has the same adhesion, welding or flex performance as a specific coated curtain grade |
Production approval
Good buyer quality control starts with a signed specification, retained approved sample and test methods appropriate to the route and system. The checklist below is a recommended acceptance plan—not a claim that every test is already included in a standard DER factory shipment.
Agree on weight tolerance, usable width, construction, shade, surface finish and minimum tensile/tear methods.
Use the proposed hot-air, hot-wedge or HF process to check seam peel, heat sensitivity and appearance.
Examine top hangers, lower straps, buckle patches, cut-outs, corner relief and fold behavior in a trial panel.
Set roll IDs, lot traceability, dimensions, visual criteria, packing, labeling and agreed inspection records.
That does not specify weave, tear resistance, low-temperature flexibility, adhesion, print finish, welding compatibility or reinforcement strength. For a specialized flame requirement, state the exact standard and market, then request applicable evidence; start with the flame-retardant fabric options rather than assuming all truck curtains qualify.
Who buys this product
Need repeatable roll width and fabric properties for serial curtain-side vehicle construction. Specify top-rail design, process capability, QC acceptance and repeat color.
Need correctly fitting replacement curtains without downtime from wrong strap spacing. Prioritize clear measurements, hardware photos and a sample of the current curtain.
Need suitable coated fabric for cutting, welding, reinforcing and printing. Compare usable roll width, weld strength, yield and defect criteria before volume purchase.
Need color consistency and printing-compatible lacquer. Define artwork placement, print process, repeatability, packaging identification and destination-market requirements.
Frequently asked questions
Short answers to the questions truck curtain fabric manufacturers, trailer builders and replacement buyers ask before requesting a quote.
A PVC truck curtain is normally made from high-tenacity woven polyester fabric coated with polyvinyl chloride (PVC) on both sides. The polyester supplies mechanical strength; the PVC provides a flexible, water-resistant outer surface. Finished curtains also need project-specific hems, reinforcements, tensioning straps and top attachments.
Neither is universally better. Around 650–750 GSM may suit curtains where lower handling weight and flexibility matter; 850–900 GSM is a common starting point for heavier-duty or larger side panels. Compare the fabric weave, tensile and tear results, coating adhesion, weld performance and total panel weight—not GSM alone.
Intact PVC-coated fabric is water-resistant and can be specified as waterproof material, but the finished curtain system depends on seams, overlaps, closures, edge construction and fitting. Ask for a seam sample and inspect the assembled trailer for water-entry paths.
Yes, PVC-coated truck curtain fabrics can be supplied with printing-compatible finishes for fleet branding. Confirm ink technology, lacquer compatibility, artwork position, fold lines and abrasion zones with a printed sample before bulk production.
Many PVC-coated polyester fabrics can be joined by hot-air, hot-wedge or high-frequency welding. Actual processing settings and seam strength depend on the coating, thickness, reinforcement and equipment; qualify the proposed seam on production samples.
Record the finished panel length and drop, top track or roller attachment, front and rear overlap, bottom buckle spacing, strap positions, vertical-pole locations and printing area. Send photos or a drawing of the old assembly; do not order from trailer nominal length alone.
No. A standard flexible side curtain should not be treated as a substitute for an approved cargo-restraint system. If your operation needs load-bearing body performance, specify the governing local requirements and obtain evidence for the complete vehicle or curtain system.
MOQ, pricing and lead time depend on fabric weight, width, color, finish, printing, reinforcement, order quantity and supply format. Send your technical specification and destination to DER factory to receive a project-specific quotation; no fixed MOQ or delivery date is implied.
Factory sourcing · Project review
Tell DER factory how the curtain will be opened, tensioned, printed and exposed to weather. This creates a more useful request than quoting only a GSM number.
Request A QuoteMOQ, sample timing, price, test availability and delivery schedule will be confirmed against the actual project.
Our products are widely used in our residential and industrial area, which can be used for producing tents, outdoor covering, flexible ventilation tube, water bladders, inflatable castles, architecture membrane structures, etc. Our main products: PVC coated fabrics, PU/TPU coated fabrics, Oxford fabric, PVC ceiling film, flexible banner material. Welcome to our site and order online.